Reliant Octel 300 Bedienerhandbuch PDF herunterladen (Seite 12)

100

101

Issue 5.00

1 - 4 Quick Setup

SECTION 4 BASIC FUNCTIONS WITHOUT MAIN GREETING

To make the InMail answer, the following programming must be done. The example

shown is for a 8-port InMail. Extension, Group and Pilot Numbers shown can be

adjusted as needed per installation requirements.

 47-01-17 Set first port of In-Mail to 25, changing this PRG requires a CHS2U GW

reset.

 10-09-01 Verify at least one resource is set to ICM/TRK or Common.

 11-07-01 Set TEL Group Pilot 64 to 555 (Note: digit 5 is set to 4 digits by default).

Never use Group 1, as this is the default group for all extensions.

 15-03-01 Set extension 224~231 to DP

 15-03-03 Set extension 224~231 to Special.

 16-02-01 Put 224~231 in Group 64.

 16-02-02 Assign priorities 1~8 to 224~231.

 16-01-01 Set Group 64 name to Voice Mail.

 16-01-04 Set Group 64 to Circular.

 16-01-10 Set Group 64 to Busy/No Answer.

 45-01-01 Set to Group 64.

SECTION 5 ENABLE THE MAILBOXES FOR ALL INSTALLED EXTENSIONS

Since by default only extensions 200-263 have Subscriber Mailboxes, you should

enable additional Subscriber Mailboxes for all installed extensions.

To enable additional Subscriber Mailboxes:

1. In 47-02-01 Mailbox Type, enter 1 to enable a Subscriber Mailbox for each

extension as a ‘Person’ mailbox.

 To make programming easier, consider associating a mailbox number with a station

port. For example, mailbox 1 should correspond to port 1, which in turn corresponds

to extension 200.

2. In 47-02-02 Mailbox Number, select the extension number to be associated with

the mailbox you are programming.

 Normally, mailbox 1 should use Mailbox Number 200, mailbox 2 should use Mailbox

Number 201, etc.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 503 504

Kommentare zu diesen Handbüchern

Keine Kommentare

Reliant Octel 300 Bedienerhandbuch Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server Reliant Octel 300