Reliant Octel 300 Bedienerhandbuch Seite 349

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 504
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 348
Issue 5.00
InMail System Guide 2 - 341
System Re-initialization
Description
Initializing the telephone system automatically initializes all InMail programming. You
may want to do this if the site requirements significantly change and it is easier to start
over from default than remove all your custom programming. Re-initializing InMail
returns all programmed options to their default values.
To initialize (erase) Subscriber Mailbox Security Codes and all recordings, use a
System Administrator Mailbox.
Related Features
System Administrator
The System Administrator can delete Subscriber Mailbox security codes as well as InMail
recorded messages.
Programming
To initialize (Cold Start) the telephone system:
1. Make sure the system (not InMail) CompactFlash card is not installed.
. The system does not boot correctly if the system CompactFlash card is installed.
2. Push the power button to Off.
3. Wait 10 seconds before going to the next step.
. This gives the system time to complete the shutdown process.
4. Press and hold the Load button, then turn the power switch to On.
5. Continue to hold down the Load button for at least 3 seconds.
6. Release the Load button.
. The system restarts in about 2 minutes.
. When the system restarts, the Live LED flashes red.
Re-initializing the telephone system returns all programmed options to their factory
set (default) values. Any site specific programming you have done is erased
following re-initialization.
Seitenansicht 348
1 2 ... 344 345 346 347 348 349 350 351 352 353 354 ... 503 504

Kommentare zu diesen Handbüchern

Keine Kommentare