Reliant FVIR GAS WATER HEATER Betriebsanleitung PDF herunterladen (Seite 16)

16

Installation Checklist

A. Water Heater Location

B. Water Supply

C. Gas Supply

D. Relief Valve

E. Venting

❑ Close to area of vent.

❑ Indoors and protected from freezing

temperatures.

❑ Proper clearance from combustible

surfaces observed and water heater not

installed on carpeted floor.

❑ Sufficient fresh air supply for proper

operation of water heater.

❑ Air supply free of corrosive elements

and flammable vapors.

❑ Provisions made to protect area from

water damage.

❑ Sufficient room to service heater.

❑ Combustible materials, such as clothing,

cleaning materials, rags, etc. clear of the

base of the heater.

❑ Clearances from combustion air inlet

openings observed (see page 7).

❑ Water heater completely filled with water.

❑ Air purged from water heater and piping.

❑ Water connections tight and free of leaks.

❑ Gas line equipped with shut-off valve,

union and sediment trap.

❑ Approved pipe joint compound used.

❑ Soap and water solution used to check

all connections and fittings for possible

gas leak.

❑ Gas Company inspected installation (if

required).

❑ Temperature and Pressure Relief Valve

properly installed and discharge line run

to open drain.

❑ Discharge line protected from freezing.

❑ Flue baffle properly hung in top of

heater ’s flue.

❑ Draft hood properly installed.

❑ Vent connector(s) pitched upward to

chimney

(¼" per foot of length minimum) .

❑ Vent connector(s) securely fastened

together with screws.

❑ Single wall vent connector(s) at least 6”

from combustible material.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare