Reliant Octel 200 and Octel 300 Message Servers PB6001401 Bedienungsanleitung Seite 522

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 668
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 521
11-6
Installation and Maintenance
V
olume
Octel Overture 200/300 Serenade 3.0
PB60014–01
11.3 TESTING
THE LAN CARD
After
the Octel Overture 200/300 has been restarted to bring up the LAN card, test whether the LAN card
is functional and is communicating with other message servers. Use the following commands:
CMD PING
LANSTAT
CMD PING
The
CMD PING
command does the lowest-level “echo” test from the LAN card at this end to the
destination message server
. It verifies that all the basic requirements are met, such as the following:
Both LAN cards are present, up and running, and talking to the CPU.
LAN end-to-end data transfer is possible across the digital network.
The LAN card IP addresses are correctly configured.
T
o use the
CMD PING
command, at the @ prompt, enter
CMD x PING y

where
x
is the slot number in which the LAN card is installed and
y
is the IP address of the device to
which the test ethernet packet is sent.
The CMD PING
command sends a low-level ethernet packet to the address specified. The receiver
replies with a ping-response packet.
An example of a ping success is as follows:
@CMD 11 PING 157.156.53.3
LAN (Ethernet) Link: 02/4/1994 12:48:20 (0179fc76:0179fc76) Rev 1.0.3
Current Time: 04/12/1994 15:15:25 @ Slot 10
LAN>PING 157.156.53.3: 56 data bytes
64 bytes from 157.156.53.3: icmp_sn=0. time=110 ms
––––157.156.53.3 PING Statistics––––
1 packets transmitted, 1 packets received, 0% packet loss
round-trip (ms) min/avg/max = 110/110/110
LAN>
@
Seitenansicht 521
1 2 ... 517 518 519 520 521 522 523 524 525 526 527 ... 667 668

Kommentare zu diesen Handbüchern

Keine Kommentare