Reliant Octel 200 and Octel 300 Message Servers PB6001401 Bedienungsanleitung PDF herunterladen (Seite 519)

100

101

LAN

Card 1

1-3

Octel Overture 200/300 Serenade 3.0

PB60014–01

System

Parameters

Configure

System Parameters 233 and 234 if a gateway and name server exist on the LAN and must be

accessed. Contact the network administrator for information about these system parameters.

System

Parameter

Description

and Use

233

LAN: NAME SER

VER IP ADDRESS

The

name server is used to determine the IP address of a node, given its ASCII

host name. The ASCII host name is used to identify a node with a symbolic name,

so that hard-coded IP addresses are not used. This entry is optional and need not be

configured if all nodes are known by their IP addresses.

The IP address of the name server must be of the form M.N.O.P, where

M = 1–223; N and O = 0–255, and P = 1–254.



This is the name server in the data network (LAN), not the Octel Overture

200/300 Netnames or Dial-by-Name directory

234 LAN:

TEWA

Y IP ADDRESS

The

gateway unit connects two or more LANs and is used only if the message

server needs to communicate with another message server on a dif

ferent network.

A typical example would be a W

ide Area Network (W

AN) connection. If a

gateway is used, its IP address must be configured here.

An IP address must be of the form M.N.O.P

, where M = 1–223; N and O = 0–255,

and P = 1–254.



This is the gateway unit in the data network (LAN), not to be confused with

the other types of the gateways, such as gateway unit used to connect V

isual

Mailbox users from the Entryworks ACP board to the LAN or message

servers used as message gateways, or the OctelAccess server link.

System Parameters 235–240 and 242 are optional.

These system parameters are only required when

accessing an existing LAN network and are used only if SNMP is to be used. The SNMP is not required

to support a dedicated LAN that connects only Octel Overture 200/300 message servers.



Simple Network Management Protocol (SNMP) is a standard protocol that allows a network

administrator on the LAN data network to request information from servers attached to the LAN

for the purposes of troubleshooting and network management. The SNMP management application

is typically an of

f-the-shelf software package run by a network administrator or technician on a

workstation or PC-compatible. Contact your network administrator to determine whether SNMP

management tools are available and how they could be useful. Refer to Appendix B, Simple

Network Management Protocol (SNMP), for additional information.

1 2 ... 514 515 516 517 518 519 520 521 522 523 524 ... 667 668

Kommentare zu diesen Handbüchern

Keine Kommentare

Reliant Octel 200 and Octel 300 Message Servers PB6001401 Bedienungsanleitung Seite 519

Kommentare zu diesen Handbüchern