Reliant Octel 200 and Octel 300 Message Servers PB6001401 Bedienungsanleitung Seite 174

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 668
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 173
4-56
Installation and Maintenance
Volume
Octel Overture 200/300 Serenade 3.0
PB60014–01
13. Repeat
the procedure from step 3 for all ports, until all ports are busied out. V
erify that calls can be
placed through the Octel Overture 200/300 from each port.
14.
From telephone A, call out and back in on a trunk dedicated to the hunt group.
15.
Does the call overflow to the correct destination?
YES Continue.
NO
Determine the cause and correct the problem before continuing.
Some PBXs might not support overflow
, in which case a ring-no-answer condition could be
encountered.
16.
Remove the busy condition from all Octel Overture 200/300 port extensions.
17.
Repeat steps 3 through 13 except call an extension that does not answer
, and then repeat it by calling
a busy extension.
Test
to Verify T
runks
1. From
telephone A, call outside the PBX and back in on the first trunk dedicated to the Octel
Overture 200/300.
2.
Does the Octel Overture 200/300 answer correctly?
YES Continue.
NO
Determine the cause and correct the problem before continuing.
3.
Repeat the procedure from step 1 for each trunk, until all hunts have been tested. V
erify that each
trunk is answered by the Octel Overture 200/300 with the correct greeting.
T
oll-free service lines can be tested individually
, even if they are bands from other areas, by
using the “plant test” number
. Get these from the PE (Public Exchange) if you do not know
them.
Test for Calls to the Intercept Extension
Verify
that the Octel Overture 200/300 can transfer a call to the intercept position (attendant) when the
caller does nothing or presses
, as follows:
1.
From telephone A, call the extension associated with port 1.
2.
Does the Octel Overture 200/300 answer correctly?
YES Continue.
NO
Determine the cause and correct the problem before continuing.
3.
Listen to the complete company greeting. Do nothing, let the Octel Overture 200/300 time out, and
transfer the call to the attendant (do not enter any digits).
4.
Did you reach the attendant?
YES
Continue for all ports.
NO
Determine the cause and correct the problem before continuing.
5.
Repeat the procedure except press
instead of waiting for a timeout.
Seitenansicht 173
1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 667 668

Kommentare zu diesen Handbüchern

Keine Kommentare