search

Reliant Octel 200 and Octel 300 Message Servers PB6001401 Bedienungsanleitung Seite 169

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 668
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 168
Installation
4-51
Octel Overture 200/300 Serenade 3.0
PB60014–01
PBX Functional Test
Verify
that each Octel Overture 200/300
port extension can initiate a transfer by doing a hookswitch flash
and a transfer code or just a hookswitch flash, before entering an extension number
. Also, verify that you
can reconnect to the caller when the extension called is not answered or busy
. Perform the following steps:
1.
Connect telephone B to the modular
-adapter position associated with port 1 of the Octel Overture
200/300.
2.
From telephone A, call the extension number associated with telephone B.
3.
Answer telephone B, and perform a hookswitch flash.
4.
Does the PBX provide a stutter or solid dial tone after the hookswitch flash?
YES
If either tone is present, continue to step 5
NO
Stop and correct the problem before continuing.
5.
Enter the transfer initiate code, if any
, then enter the extension number associated with telephone C.
6.
After several ringbacks, perform a hookswitch flash and reconnect code, if required, to reconnect to
telephone A.
7.
Did telephone C stop ringing? Were you get reconnected to telephone A, which was on hold?
YES
Connect telephone B to the next Octel Overture 200/300 port extension and
continue until the extensions for each port are tested.
NO
Determine the cause and correct the problem before continuing.
8.
Make telephone C busy by taking it of
f-hook. Then repeat the test, starting with step 1 and calling a
busy extension instead of the ring-no-answer extension.
The extension number connected to telephone C should start with the same first digit as those
configured in the USER T
able.
Test for Calls to the Intercept Extension (Attendant)
Verify
that each extension can transfer a call to the intercept extension (attendant), as follows:
1.
Connect telephone B to the modular
-adapter position associated with port 1 of the Octel Overture
200/300.
2.
From telephone A, call the extension number associated with telephone B.
3.
Answer telephone B, and perform a hookswitch flash and enter the transfer code, if required. Press
(or the attendant’
s extension number), then hang up telephone B.
4.
Did telephone A connect with the operator?
YES
Continue test for all extensions, then proceed to the test in the next section.
NO
Determine the cause and correct the problem before continuing.
Some PBXs do not allow a blind (unscreened) transfer to an attendant. If this is the case, do
not assign Attribute 15 — TRANSFER T
O A RINGING EXTENSION, to the COS for this
mailbox.
Seitenansicht 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 667 668

Kommentare zu diesen Handbüchern

Keine Kommentare
  • Hasty-bake Cross Trainer Advanced-global-technology Braemar Spp-pumps
  • Alesis Zusätzliche Musikausrüstung Omron Kameraobjektive Fisher & Paykel Kühlschränke Insignia Lautsprecher Ask Proxima Projektoren
  • Bosch MCM 5529RU Philips 278E8QJAB/00 Abit AA8-DuraMAX Epson Perfection 600 TP-LINK TD-VG3631
  • Acer S1370WHn Bedienungsanleitung Nec LT20 Bedienungsanleitung Olympus C-740 Schnellstart Anleitung Sony NWZ-F804 Bedienungsanleitung LG RH1888H Bedienungsanleitung