Reliant Octel 200 and Octel 300 Message Servers PB6001401 Bedienungsanleitung PDF herunterladen (Seite 101)

100

101

Preparing

the Phone System 3-1

Octel Overture 200/300 Serenade 3.0

PB60014–01

3.1 HOW

THE OCTEL OVERTURE 200/300 WORKS WITH THE

PHONE SYSTEM

The Octel Overture



200/300 message servers work with PBXs, Centrex, most hybrids, and some key

systems. The Octel Overture 200/300 is configured with its voice ports connected to the phone system as

a series of DTMF touchtone single line analog

extensions (touchtone sets). In the PBX, these extensions

are programmed to receive an incoming call, to place outgoing calls (within the PBX for message waiting

and also outside the PBX for of

fsite paging and alarm calls), to place calls on hold, transfer calls, and

reconnect if the called party does not answer

. This configuration is referred to as “behind the switch”

because the ports are on the extension side, not the trunk side, as illustrated in Figure 3-1.







Figure 3-1

Octel Overture 200/300 Connection to Phone System

PBX

Octel

Overture

200/300

For

convenience, this manual uses the terms “phone system” and “PBX” to refer to any telephone system

that works with the Octel Overture 200/300.

This chapter discusses Octel Overture 200/300 connection to the phone system, the changes required, and

how to order them. It assumes familiarity with some PBX concepts.

Changes need to be made to the phone system for Octel Overture 200/300 message servers. Some are

changes to the PBX; others are done in the Public Exchange (PE). This may require lead time. W

ork with

the client to determine who will make the changes and how long they will take. Prepare a schedule so

that everyone knows who is doing what and the date each item is required.

Interfaced Installations

Each

Octel Overture 200/300 port is connected to a touchtone single-line, touchtone PBX extension. A

25-pair cable connects the Octel Overture 200/300 line card to the PBX extension. A PBX extension

connected to a Octel Overture 200/300 port is referred to as a port extension.

In order for the Octel Overture 200/300 to extend calls correctly

, each port extension must be configured

in the PBX to receive calls, place them on hold, initiate, transfer

, and reconnect calls.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 667 668

Kommentare zu diesen Handbüchern

Keine Kommentare

Reliant Octel 200 and Octel 300 Message Servers PB6001401 Bedienungsanleitung Seite 101

Kommentare zu diesen Handbüchern